A 2002 Mitsubishi Montero. It caught our eye initially because it was about 1/3 of the purchase price of the other vehicles we were considering. Then as we researched further, we realized that we had been overlooking a very capable and well-tested platform. When we picked it up, it was fresh from the mall and soccer field parking lot, complete with Cheerios under the back seat.
-1.5" lift from OME with new wheels and tires. The more aggressive stance eliminates the Soccer Mom look and that is what's most important, but the stiffer springs and wider track will also provide more stability and the added height will increase the clearance over obstacles.
-We also had a small roof rack and brush guard fabricated. The rack has its obvious utility and the brush guard is for deflecting deer, or whatever animals they have down there (kangaroos?). It would be a bummer if something like that ended our trip prematurely.
In the interior we wanted to create a few of the comforts of home, seeing as we would be living in the Montero for the next few months. We started with a 12v fridge/freezer and ended up building everything else around that. Christian designed a sleeping platform that folds up for easy access to the fridge and allows for storage of all our other gear.
Once we had a fridge we needed some way to power it, so Christian wired up an auxiliary battery. With the secondary battery we can be sure that the Montero will start every morning, even if we run the fridge all night. We also swapped all interior lights to warm-white LED's. This will provide more confortable and brighter light while using much less electricity. Conveniently the Montero has individual lights for the rear seats. They're perfect for reading lights while we're in bed. It'll be just like home!
This is the rear platform in its open and closed positions.
The fridge. It is about 10 inches deeper than you can see here. The auxiliary battery is mounted below those plastic bins.
We mounted a safe inside to keep our documents and cash from the banditos.
Here is the front of the platform in its open and closed positions. As of about 9 pm the night before we left, I still hadn't figured out how to have this be supported in the front. I was thinking some sort of double hinged legs but couldn't figure out the best way to do it. Then Kaytie's mom Sheila came up with the incredibly effective and simple idea to use wooden dowels with those rubber feet used to prevent scratching floors mounted upside down on the platform. Works like a charm.
And finally we got to the bed. An Ikea Skadvofamsovasdka mattess with our most favorite billion count I-got-it-at-Ross sheets. We added a down comforter for those chili Mexican nights. (See what I did there?) After sleeping on the side of the road last night, I'm fairly confident we have the most comfortable bed currently traveling down US Highway 550.
Much thanks to Kaytie's brother Justin and my cousin Chase for their help. There is no way we would have finished all this in such a short amount of time without them.
You're welcome and you misspelled comfortable. :)
ReplyDeleteIt takes a simple minded mother-in-law to come up with a simple solution! Hey, did you paint the front brush guard? It looks gray in the photo, and when I saw it, it was black. Can't wait to hear some adventures--happy ones, I hope!
ReplyDeleteFYI for all you blog followers, I spoke with Kaytie today when they were 1 mile before crossing into Mexico. Time to amp up my prayers!
ReplyDeleteThe photo with grey was before the paint. It's black now. Actually it's kinda a reddish brown from all the mud we found.
ReplyDeleteGreat job of modification and fabrication. Your research and preparation make me feel much better about this crazy adventure of yours, knowing what I know about living in "developing" nations. Good luck, be safe, have fun, bring back souvenirs!
ReplyDeleteLooks ready for anything! We'll be keeping an eye out for you guys ;)
ReplyDeleteGlad to see our old truck was put to such good use. It looks like you had a lot of fun. And I have to admit, it does look much more awesome after your mods. I always wanted to lift it a little.
ReplyDeleteHey Folks,
ReplyDeleteincredible job you guys have done with your sweet bed construction. We are leaving for our Panam-adventure and still looking for an inspiration for our Montero. Then we found you guys;)
We would love to get some more details from you guys...if you want, please get back to me (dressli@gmx.de)
Cheers Caro
This comment has been removed by the author.
ReplyDeleteDid you have to use centering rings for these wheels? SInce the center bore is probably bigger? Thank you!
ReplyDeleteI didn't use centering rings. If I recall these wheels were lug centric. Hub centric is obviously better but it worked fine for us.
ReplyDeleteWith your build and corneringconsciousness', I have all the design ideas I need. It took me weeks to find your post again, but now it is safely bookmarked :).
ReplyDeleteIf you were to do it again, would you change anything?
-Heavy duty springs in the rear in place of medium duty.
ReplyDelete-Gas tube struts to hold the back section of the platform up when needed.
-and i would have brought a whole bunch less stuff on the trip.
Other than that we were pretty happy with it.
I hope this blog is still active. I was wondering what kind of wood you used for the bed platform ? Also what is it covered with.
ReplyDeleteThanks
I believe it was just 3/4" ply and covered with felt fabric on all surfaces with additional indoor/outdoor carpet on the top.
DeleteCan you us more details about your wheels? Rim size, width, offset. Thanks
ReplyDeleteI just got a 2001 Montero XLS and you're blog just gave me quite a bit of motivation to build mine.